1. Home
  2. RUCKUS Networks Blogs
  3. Venue & Campus Networks

RUCKUS Networks Blogs

Subscribe to RUCKUS content

Articles found: 31

Configuring an Over-deployed, 1 AP per Classroom School: The Answer is not 42. It’s Channel Planning
Configuring an Over-deployed, 1 AP per Classroom School: The Answer is not 42. It’s Channel Planning

In AP deployment, it’s critical to plan for any potential Interference. Only APs on the same channel interfere with each other. Channel plan accordingly.

jim-stewart Jim Stewart

May 06, 2019

4 minute read
The Checklist – Configuring an Over-Deployed, 1 AP per Classroom School
The Checklist – Configuring an Over-Deployed, 1 AP per Classroom School

One AP for every other classroom is an unwritten rule for the Ruckus engineering team. They’ve developed the perfect checklist for WLAN school deployment.

jim-stewart Jim Stewart

April 29, 2019

2 minute read
School WLAN design: Top-of-Line Wi-Fi 6 and an AP in Every Classroom
School WLAN design: Top-of-Line Wi-Fi 6 and an AP in Every Classroom

Wi-Fi is a given part of the infrastructure in schools. Ruckus APs are designed to maximize coverage area and client capacity.

jim-stewart Jim Stewart

April 22, 2019

2 minute read
Wi-Fi 6 fundamentals: What is 1024-QAM?
Wi-Fi 6 fundamentals: What is 1024-QAM?

1024-QAM enables a 25% data rate increase in Wi-Fi 6 (802.11ax) access points and devices. By varying both the phase and the amplitude of the radio waves, the technology improves spectral efficiency by incorporating more data into each transmission. This is crucial for consistently serving a large number of clients.

Dennis Huang Dennis Huang

October 23, 2018

4 minute read